China wholesaler Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining chain pulley

Product Description

A conveyor will always consist of at least 2 pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required.

Different kinds of conveyor pulleys
KONWEYOUR sells conveyor pulleys in all the following sub-categories: 

Head pulleys

The head pulley is located at the discharge point of the conveyor. It usually drives the conveyor and often has a larger diameter than other pulleys. For better traction, the head pulley is usually lagged (with either rubber or ceramic lagging material).

Tail and CHINAMFG pulleys

The tail pulley is located at the loading end of the belt. It comes with either a flat face or a slatted profile (wing pulley), which cleans the belt by allowing material to fall between the support members.

Snub pulleys

A snub pulley improves the traction of the drive pulley, by increasing its belt wrap angle.

Drive pulleys

Drive pulleys, which can also be the head pulley, are driven by a motor and power transmission unit to propel the belt and material to the discharge.

Bend pulleys

A bend pulley is used for changing the direction of the belt.

Take-up pulley

A take-up pulley is used to provide the belt with the proper amount of tension. Its position is adjustable.

Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive Pulley           500 500

Length of the pulley depends on the belt width of the conveyor 

650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend Pully           500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600

 

Shipping Cost:

Estimated freight per unit.



To be negotiated
Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: Frequency Control Motor
Customization:
Available

|

Customized Request

drive belt pulley

Are there different types of drive belt pulleys, and how do they vary in applications?

Yes, there are different types of drive belt pulleys, and they vary in their applications based on various factors. Here’s a detailed explanation of the different types of drive belt pulleys and their varying applications:

1. V-Belt Pulleys:

V-belt pulleys are one of the most common types of pulleys used in drive systems. They have a V-shaped groove that matches the cross-section of V-belts, which helps improve traction and prevent belt slippage. V-belt pulleys are suitable for applications that require high torque transmission, such as in industrial machinery, HVAC systems, and automotive engines. They are versatile and can accommodate a wide range of belt widths and power requirements.

2. Timing Pulleys:

Timing pulleys, also known as synchronous pulleys, have evenly spaced teeth on their periphery. They are used with timing belts, which have corresponding teeth, to ensure precise power transmission and synchronization of rotational motion. Timing pulleys are commonly found in applications that require accurate positioning, such as in CNC machines, robotics, printing presses, and automotive engine timing systems. They provide excellent torque transfer and are resistant to slippage.

3. Flat Belt Pulleys:

Flat belt pulleys have a flat, smooth surface without grooves or teeth. They are used with flat belts, which rely on friction for power transmission. Flat belt pulleys are suitable for applications that require high-speed rotation, such as in textile machinery, packaging equipment, and conveyors. They offer a simple and cost-effective solution for transferring power in systems that don’t require high torque.

4. Grooved Pulleys:

Grooved pulleys, also known as serpentine or multi-groove pulleys, have multiple grooves or channels on their periphery. These grooves accommodate multiple belts, typically V-belts or ribbed belts, running side by side. Grooved pulleys are commonly used in automotive engines, where a single pulley may drive multiple engine accessories, such as the alternator, power steering pump, and air conditioning compressor. They allow for compact designs and efficient power distribution.

5. Variable Speed Pulleys:

Variable speed pulleys, also called adjustable pulleys or variable pitch pulleys, provide the ability to change the effective diameter of the pulley, allowing for variable speed control. They consist of two halves that can be adjusted to increase or decrease the pulley diameter, altering the speed of the driven component. Variable speed pulleys are used in applications that require adjustable speed control, such as in exercise equipment, industrial machinery, and certain types of transmissions.

6. Idler Pulleys:

Idler pulleys are used to redirect or change the direction of a belt in a drive system. They do not transmit power but instead help guide and maintain proper belt tension. Idler pulleys are commonly used in conjunction with other pulleys in automotive engines, industrial machinery, and HVAC systems. They help improve belt wrap around driven pulleys, increase belt life, and reduce vibration.

7. Tensioner Pulleys:

Tensioner pulleys, also known as belt tensioners, are specifically designed to maintain proper tension in belt drive systems. They are often spring-loaded and provide a constant force against the belt, compensating for belt stretch or wear over time. Tensioner pulleys are commonly found in automotive engines, where they ensure optimal belt tension to prevent slippage, reduce noise, and extend belt life.

Each type of drive belt pulley has its own unique design and features that make it suitable for specific applications. The selection of the pulley type depends on factors such as the type of belt being used, the power requirements, the desired speed control, and the specific application requirements. By choosing the appropriate pulley type, engineers can ensure efficient power transmission, reliable operation, and optimal performance in various industrial, automotive, and mechanical systems.

drive belt pulley

What maintenance procedures are necessary to ensure the reliability of drive belt pulleys?

Proper maintenance procedures are essential to ensure the reliability and longevity of drive belt pulleys. Here’s a detailed explanation of the maintenance procedures necessary for drive belt pulleys:

1. Regular Inspection:

Perform regular visual inspections of the drive belt pulleys to check for signs of wear, damage, or misalignment. Look for cracks, fraying, glazing, or excessive wear on the pulley surface and the grooves. Inspect the pulley for any signs of misalignment, such as a wobbling or off-center rotation. Early detection of issues allows for timely corrective action and minimizes the risk of pulley failure.

2. Belt Tension Adjustment:

Maintain proper belt tension by periodically checking and adjusting the tension according to the manufacturer’s specifications. A loose or overtightened belt can lead to belt slippage, reduced power transmission, and premature pulley wear. Use a belt tension gauge or follow the recommended tension adjustment procedure to ensure the belt is correctly tensioned for optimal performance and longevity.

3. Belt Condition and Replacement:

Regularly inspect the condition of the drive belt and replace it as needed. Over time, belts can deteriorate, become brittle, or develop cracks. A worn-out or damaged belt can cause excessive stress on the pulley, leading to pulley wear or failure. Replace the belt if you notice any signs of damage, including excessive wear, fraying, or loss of tension. Follow the manufacturer’s recommendations for belt replacement intervals.

4. Pulley Cleaning:

Keep the drive belt pulleys clean from dirt, debris, and oil buildup. Accumulated debris can interfere with belt engagement and increase friction, leading to premature wear on both the belt and the pulley. Clean the pulleys regularly using a mild detergent and a soft brush or cloth. Avoid using harsh chemicals or solvents that may damage the pulley surface or the belt material.

5. Lubrication:

Some drive belt pulleys may require lubrication to reduce friction and maintain smooth operation. Refer to the manufacturer’s guidelines to determine if lubrication is necessary and the recommended lubricant type. Apply the lubricant sparingly and ensure that it does not come into contact with the belt, as it can cause slippage or degradation of the belt material.

6. Pulley Alignment:

Check and maintain proper pulley alignment to prevent excessive belt wear and premature pulley failure. Misaligned pulleys can cause the belt to run at an angle, resulting in uneven wear and increased stress on the pulley. Use alignment tools or consult a professional to ensure the pulleys are correctly aligned. Adjust or replace pulleys as necessary to achieve proper alignment.

7. Environmental Protection:

Protect the drive belt pulleys from extreme environmental conditions that can accelerate wear and deterioration. Shield the pulleys from excessive moisture, high temperatures, chemicals, and abrasive contaminants. In harsh environments, consider using pulley covers or shields to provide additional protection and prolong the pulley’s lifespan.

8. Professional Inspection:

Periodically have the drive belt pulleys inspected by a qualified technician or during routine maintenance visits. Professional inspection can help detect any potential issues that may not be easily visible or apparent during regular inspections. A trained professional can perform more thorough assessments, including pulley runout measurement, alignment checks, and overall system evaluation.

By following these maintenance procedures, you can ensure the reliability and longevity of drive belt pulleys. Regular inspection, proper tension adjustment, belt condition monitoring, pulley cleaning, lubrication (if necessary), pulley alignment, environmental protection, and periodic professional inspection contribute to the optimal performance and reliability of drive belt pulleys in power transmission systems.

drive belt pulley

What types of drive belts are typically employed with drive belt pulleys?

Drive belt pulleys are commonly used in conjunction with different types of drive belts, depending on the specific application and requirements. Here’s a detailed explanation of the types of drive belts typically employed with drive belt pulleys:

1. V-Belts:

V-belts are one of the most commonly used types of drive belts with drive belt pulleys. They have a trapezoidal cross-section and typically feature a fabric cover and rubber construction. V-belts are designed to fit into the V-shaped grooves of the pulley and provide reliable power transmission. They are known for their flexibility, high friction grip, and ability to handle high-speed applications. V-belts are commonly used in automotive engines, industrial machinery, and various power transmission systems.

2. Serpentine Belts:

Serpentine belts, also known as multi-rib belts, have a flat cross-section with multiple ribs on one side. These belts wrap around multiple pulleys, including drive belt pulleys, in a serpentine pattern. Serpentine belts are commonly used in modern vehicles as they can drive multiple components simultaneously, such as the alternator, water pump, power steering pump, air conditioning compressor, and more. They offer efficient power transmission, high load-carrying capacity, and reduced slippage.

3. Timing Belts:

Timing belts, also referred to as toothed belts, have teeth on the inner side that mesh with corresponding grooves in timing pulleys. These belts are primarily used in engines to synchronize the rotation of the crankshaft and camshaft, ensuring precise valve timing. Timing belts are made of a flexible, reinforced material, usually rubber with embedded fibers or cords, providing excellent power transmission and resistance to wear. They are commonly used in automotive engines and other applications where timing precision is critical.

4. Flat Belts:

Flat belts have a rectangular cross-section and are made of materials such as rubber, leather, or fabric. They are often employed in applications where high-speed power transmission is required with minimal vibration and noise. Flat belts typically run on flat pulleys, which can include drive belt pulleys. They are commonly used in industrial machinery, agricultural equipment, and conveyor systems.

5. Ribbed Belts:

Ribbed belts, also known as micro V-belts or multi-rib belts, have a ribbed cross-section with multiple longitudinal ribs on one side. These ribs fit into corresponding grooves on the pulley, providing a larger contact area and enhanced power transmission capabilities. Ribbed belts are commonly used in automotive engines, power tools, and appliances. They offer high flexibility, excellent grip, and can transmit higher loads compared to standard V-belts.

6. Variable Speed Belts:

Variable speed belts, also called adjustable speed belts or link belts, are designed to provide a variable speed drive. They consist of multiple individual links connected by metal or plastic hinges. These belts can be adjusted in length by adding or removing links, allowing for flexibility in speed and torque transmission. Variable speed belts are commonly used in applications where speed variation is required, such as HVAC systems, agricultural machinery, and industrial equipment.

These are some of the types of drive belts typically employed with drive belt pulleys. The selection of the appropriate drive belt depends on factors such as the application, power requirements, speed, load, and specific performance characteristics needed for optimal power transmission.

China wholesaler Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining   chain pulleyChina wholesaler Belt Conveyor Drive Head Bend Take up Snub CZPT Tail Ceramic Rubber Coated CZPT Herringbone Chevron Grooved Lagging Crowned Motorized Drum Pulley for Mining   chain pulley
editor by CX

2023-09-21

Drive Belt Pulley

As one of the drive belt pulley manufacturers, suppliers, and exporters of mechanical products, We offer drive belt pulley and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the drive belt pulley.

Recent Posts