China high quality Dtii a Long Lifetime Heavy Duty Belt Conveyor Rubber Lagging Drive Drum Pulley pulley alternator

Product Description


Conveyor Pulley is
manufactured as per customer requirement,with main design under national standard,quality inspection focusing on shaft core,welded joint,rubber material and hardness,dynamic balance and so on for longer product life time.

Drive/Head Pulley – A conveyor pulley used for the purpose of driving a conveyor belt. Typically mounted in external bearings and driven by an external drive source.
Return/Tail Pulley – A conveyor pulley used for the purpose of redirecting a conveyor belt back to the drive pulley. Tail pulleys can utilize internal bearings or can be mounted in external bearings and are typically located at the end of the conveyor bed. Tail pulleys commonly serve the purpose of a Take-Up pulley on conveyors of shorter lengths.
Snub Pulley – A conveyor pulley used to increase belt wrap around a drive pulley, typically for the purpose of improving traction.
Take-Up Pulley – A conveyor pulley used to remove slack and provide tension to a conveyor belt. Take-Up pulleys are more common to conveyors of longer lengths.
Bend Pulley – A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system.

The specification of pulley:
Drive Drum: is the main component of power transmission. The drum can be divided into single drum (the angle of the belt to the drum is 210 ° ~ 230 °) , Double Drum (the angle of the belt to the drum is up to 350 °) and
multi-drum (used for high power) . 
Bend Drum: is used for changing the running direction of the conveyor belt or increasing the surrounding angle of the conveyor belt on the driving roller, and the roller adopts a smooth rubber surface . The drum shaft shall be forgings and shall be nondestructive tested and the inspection report shall be provided. 
The Various Surface of Pulley:
Conveyor pulley lagging is essential to improve conveyor belt performance, the combination of our pulley lagging can reduces belt slippage, improve tracking and extends life of belt, bearing & other components.

PLAIN LAGGING:This style of finish is suitable for any pulley in the conveyor system where watershed is not necessary. It provides additional protection against belt wear, therefore, increasing the life of the pulley.
DIAMOND GROOVE LAGGING:This is the standard pattern on all Specdrum lagged conveyor pulleys. It is primarily used for reversing conveyor drive pulleys. It is also often used to allow bi-directional pulley rotation, and the pattern allows water to be dispersed away from the belt.
HERRINGBONE LAGGING:The herringbone pattern’s grooves are in the direction of rotation, and offers superior tractive properties. Each groove allows water and other liquids to escape between the face of the drum pulley and the belt. Herringbone grooved pulleys are directional and should be applied to the conveyor in a manner in which the grooves point toward the direction of the belt travel.
CHEVRON LAGGING:Some customers specify that the points of the groove should meet – as done in Chevron styled lagging. As before with the herringbone style, this would be used on drive drum pulleys and should be fitted in the correct manner, so as to allow proper use of the pattern and water dispersion also.
CERAMIC LAGGING:The Ceramic tiles are moulded into the lagging which is then cold bonded to the drum pulley. This style of finish allows excellent traction and reduces slippage, meaning that the belt tension is lower and, therefore as a result, increases the life of the pulley.
WELD-ON STRIP LAGGING: Weld-On Strip Lagging can be applied to bi-directional pulleys, and also has a finish to allow the easy dispersion of water or any fluids between the drum pulley and the belt.

The Components of Pulley:

1. Drum or Shell:The drum is the portion of the pulley in direct contact with the belt. The shell is fabricated from either a rolled sheet of steel or from hollow steel tubing.
2.Diaphragm Plates: The diaphragm or end plates of a pulley are circular discs which are fabricated from thick steel plate and which are welded into the shell at each end, to strengthen the drum.The end plates are bored in their centre to accommodate the pulley Shaft and the hubs for the pulley locking elements.
3.Shaft :The shaft is designed to accommodate all the applied forces from the belt and / or the drive unit, with minimum deflection. The shaft is located and locked to the hubs of the end discs by means of a locking elements. The shaft and hence pulley shafts are often stepped.
4.Locking Elements:These are high-precision manufactured items which are fitted over the shaft and into the pulley hubs. The locking elements attach the pulley firmly to the shaft via the end plates.
5.Hubs:The hubs are fabricated and machined housings which are welded into the end plates.
6.LaggingIt is sometimes necessary or desirable to improve the friction between the conveyor belt and the pulley in order to improve the torque that can be transmitted through a drive pulley. Improved traction over a pulley also assists with the training of the belt. In such cases pulley drum surfaces are `lagged` or covered in a rubberized material.
7.Bearing: Bearings used for conveyor pulleys are generally spherical roller bearings, chosen for their radial and axial load supporting characteristics. The bearings are self-aligning relative to their raceways, which means that the bearings can be ‘misaligned’ relative to the shaft and plummer blocks, to a certain degree. In practical terms this implies that the bending of the shaft under loaded conditions as well as minor misalignment of the pulley support structure, can be accommodated by the bearing.

The Production Process of Pulley:
Our Products:

1.Different types of Laggings can meet all kinds of complex engineering requirements.
2.Advanced welding technology ensures the connection strength between Shell and End-Disk.
3.High-strength Locking Elements can satisfy torque and bending requirements.
4.T-shape End-Discs provide highest performance and reliability.
5.The standardized Bearing Assembly makes it more convenient for the end user to replace it.
6.Excellent raw material and advanced processing technology enable the shaft can withstand enough torque.
7.Low maintenance for continued operation and low total cost of ownership.
8.Scientific design process incorporating Finite Element Analysis.

Our Workshop:

MACHINE:We have advanced laser cutting machines, a complete set of intelligent sheet metal forming equipment, robot welding and other processing and testing equipment.
PAINTING:  We use electrostatic spraying to ensure variety, model and quality of coatings, thinners and curing agents should meet the design requirements and the current relevant national standards. The steel surface should be free of welding slag, welding scars, dust, oil, water and burrs before painting. No mispainting or omission, and the coating should be free of peeling and rust. Inspection method: observation and inspection. Uniform brushing, consistent color,  no wrinkles,sagging and bubbles, good adhesion, and the color separation line should be clear and neat.
DELIVERY:The goods and product factory certificate, installation and use instructions and drawings, a full set of connectors. After the equipment arrives at the site, the company immediately arranges professional and technical personnel to guide the installation on site to provide customers with satisfactory services.
PACKAGE:Packed with steel frame or wooden box, according to the standardfor trade export or according to the special requirements of customers.

 

Material: Carbon Steel
Surface Treatment: Baking Paint
Motor Type: Frequency Control Motor
Installation: Horizontal
Working Life: 30000 Hours
Color: Red, Green, Blue or as Require
Samples:
US$ 40/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

drive belt pulley

What is the significance of proper alignment and tensioning in drive belt pulley systems?

The proper alignment and tensioning of drive belt pulley systems are of significant importance. Here’s a detailed explanation of the significance of proper alignment and tensioning in drive belt pulley systems:

1. Efficient Power Transmission:

Proper alignment and tensioning ensure efficient power transmission in drive belt pulley systems. When the pulleys and belts are correctly aligned, the force from the driving pulley is efficiently transferred to the driven pulley, minimizing energy losses due to slippage or misalignment. Similarly, appropriate tensioning of the belts helps prevent belt slip, ensuring optimal power transfer and maximizing the efficiency of the system. Efficient power transmission results in improved overall system performance and reduced energy consumption.

2. Reduced Wear and Extended Lifespan:

Proper alignment and tensioning help reduce wear and extend the lifespan of the belts, pulleys, and other system components. Misalignment or excessive belt tension can cause uneven wear on the belts, resulting in premature failure. Inadequate tensioning may also lead to excessive belt stretch, reducing the contact between the belt and pulleys and causing additional wear. When the pulleys are properly aligned and the belts are correctly tensioned, the load is evenly distributed, minimizing stress on the components and prolonging their operational life.

3. Noise and Vibration Control:

Correct alignment and tensioning contribute to noise and vibration control in drive belt pulley systems. Misaligned pulleys or improperly tensioned belts can cause vibrations and noise during operation. These vibrations can result in increased noise levels and discomfort for users. By ensuring proper alignment and tensioning, the system operates smoothly, reducing vibrations and noise, and providing a quieter and more comfortable user experience.

4. Enhanced System Reliability:

Proper alignment and tensioning improve the reliability of drive belt pulley systems. When the pulleys are aligned correctly and the belts are appropriately tensioned, the chances of unexpected belt slippage, belt damage, or component failure are significantly reduced. Reliable operation of the system leads to increased uptime, reduced maintenance requirements, and improved overall system reliability, which is crucial in various applications, including industrial machinery, automotive systems, and HVAC systems.

5. Improved Safety:

Ensuring proper alignment and tensioning in drive belt pulley systems enhances safety. Misaligned pulleys or loose belts can pose safety hazards, especially in high-speed or high-torque applications. Belt slippage or sudden disengagement can lead to accidents, injuries, or damage to the equipment. By maintaining proper alignment and tensioning, the risk of such incidents is minimized, creating a safer working environment for operators and preventing costly accidents or downtime.

6. Ease of Maintenance:

Proper alignment and tensioning facilitate easier maintenance of drive belt pulley systems. When the pulleys and belts are aligned correctly, it becomes easier to inspect, adjust, or replace the belts as needed. Similarly, proper tensioning allows for straightforward adjustment or replacement of the belts without the need for excessive force or complicated procedures. This simplifies maintenance tasks, reduces downtime, and improves the overall serviceability of the system.

7. Cost Savings:

The significance of proper alignment and tensioning extends to cost savings in drive belt pulley systems. By maintaining optimal alignment and tensioning, the system operates at peak efficiency, reducing energy consumption and associated operating costs. Additionally, proper alignment and tensioning minimize premature wear and damage to the belts and pulleys, reducing the frequency of component replacements and repair costs. Overall, the proper alignment and tensioning of drive belt pulley systems result in long-term cost savings for system owners.

In conclusion, proper alignment and tensioning in drive belt pulley systems are crucial for efficient power transmission, reduced wear, extended lifespan, noise and vibration control, enhanced system reliability, improved safety, ease of maintenance, and cost savings. By paying attention to alignment and tensioning, the performance, longevity, and overall efficiency of drive belt pulley systems can be maximized.

drive belt pulley

What maintenance procedures are necessary to ensure the reliability of drive belt pulleys?

Proper maintenance procedures are essential to ensure the reliability and longevity of drive belt pulleys. Here’s a detailed explanation of the maintenance procedures necessary for drive belt pulleys:

1. Regular Inspection:

Perform regular visual inspections of the drive belt pulleys to check for signs of wear, damage, or misalignment. Look for cracks, fraying, glazing, or excessive wear on the pulley surface and the grooves. Inspect the pulley for any signs of misalignment, such as a wobbling or off-center rotation. Early detection of issues allows for timely corrective action and minimizes the risk of pulley failure.

2. Belt Tension Adjustment:

Maintain proper belt tension by periodically checking and adjusting the tension according to the manufacturer’s specifications. A loose or overtightened belt can lead to belt slippage, reduced power transmission, and premature pulley wear. Use a belt tension gauge or follow the recommended tension adjustment procedure to ensure the belt is correctly tensioned for optimal performance and longevity.

3. Belt Condition and Replacement:

Regularly inspect the condition of the drive belt and replace it as needed. Over time, belts can deteriorate, become brittle, or develop cracks. A worn-out or damaged belt can cause excessive stress on the pulley, leading to pulley wear or failure. Replace the belt if you notice any signs of damage, including excessive wear, fraying, or loss of tension. Follow the manufacturer’s recommendations for belt replacement intervals.

4. Pulley Cleaning:

Keep the drive belt pulleys clean from dirt, debris, and oil buildup. Accumulated debris can interfere with belt engagement and increase friction, leading to premature wear on both the belt and the pulley. Clean the pulleys regularly using a mild detergent and a soft brush or cloth. Avoid using harsh chemicals or solvents that may damage the pulley surface or the belt material.

5. Lubrication:

Some drive belt pulleys may require lubrication to reduce friction and maintain smooth operation. Refer to the manufacturer’s guidelines to determine if lubrication is necessary and the recommended lubricant type. Apply the lubricant sparingly and ensure that it does not come into contact with the belt, as it can cause slippage or degradation of the belt material.

6. Pulley Alignment:

Check and maintain proper pulley alignment to prevent excessive belt wear and premature pulley failure. Misaligned pulleys can cause the belt to run at an angle, resulting in uneven wear and increased stress on the pulley. Use alignment tools or consult a professional to ensure the pulleys are correctly aligned. Adjust or replace pulleys as necessary to achieve proper alignment.

7. Environmental Protection:

Protect the drive belt pulleys from extreme environmental conditions that can accelerate wear and deterioration. Shield the pulleys from excessive moisture, high temperatures, chemicals, and abrasive contaminants. In harsh environments, consider using pulley covers or shields to provide additional protection and prolong the pulley’s lifespan.

8. Professional Inspection:

Periodically have the drive belt pulleys inspected by a qualified technician or during routine maintenance visits. Professional inspection can help detect any potential issues that may not be easily visible or apparent during regular inspections. A trained professional can perform more thorough assessments, including pulley runout measurement, alignment checks, and overall system evaluation.

By following these maintenance procedures, you can ensure the reliability and longevity of drive belt pulleys. Regular inspection, proper tension adjustment, belt condition monitoring, pulley cleaning, lubrication (if necessary), pulley alignment, environmental protection, and periodic professional inspection contribute to the optimal performance and reliability of drive belt pulleys in power transmission systems.

drive belt pulley

What are the advantages of using drive belt pulleys in automotive engines?

Drive belt pulleys offer several advantages when used in automotive engines. Here’s a detailed explanation of the advantages of using drive belt pulleys in automotive engines:

1. Power Distribution:

Drive belt pulleys enable efficient power distribution within the automotive engine. They transfer power from the engine’s crankshaft to various components such as the alternator, water pump, power steering pump, air conditioning compressor, and supercharger. This ensures that these components receive the necessary power to operate effectively, contributing to the overall performance of the vehicle.

2. Versatility:

Drive belt pulleys are versatile components that can accommodate multiple belts and drive various accessories simultaneously. They can be designed to have multiple grooves, allowing them to drive different systems and components within the automotive engine. This versatility enables the integration of various systems and accessories, enhancing the functionality and convenience of the vehicle.

3. Easy Maintenance:

Drive belt pulleys are relatively easy to maintain and replace. If a belt becomes worn or damaged, it can be easily removed and replaced without the need for extensive disassembly of the engine. This simplifies maintenance tasks and reduces downtime during repairs or belt replacements, ensuring that the vehicle can be quickly back on the road.

4. Efficiency and Performance:

Drive belt pulleys contribute to the overall efficiency and performance of automotive engines. By properly transferring power to driven components, they ensure the optimal operation of systems such as the alternator for electrical generation, the water pump for engine cooling, and the power steering pump for smooth steering. This results in improved fuel efficiency, reliable performance, and enhanced driving experience.

5. Cost-Effectiveness:

Using drive belt pulleys in automotive engines can be cost-effective. Compared to alternative power transmission systems, such as gear-driven systems, drive belt pulleys are often more affordable to manufacture and maintain. They also provide flexibility in accommodating different belt sizes and types, allowing for cost-effective customization based on specific vehicle requirements.

6. Noise and Vibration Damping:

Drive belt pulleys help dampen noise and vibrations generated by the engine and other components. The flexibility and elasticity of the belt, along with the design of the pulley, act as a cushion, reducing the transmission of vibrations and providing smoother operation. This contributes to a quieter and more comfortable driving experience.

7. Compact Design:

Drive belt pulleys have a compact design, which is advantageous in automotive engines where space is often limited. They can be integrated into the engine layout without requiring significant additional space or complex modifications. This compact design allows for efficient packaging of the engine components and contributes to overall vehicle weight reduction.

8. Customization and Compatibility:

Drive belt pulleys can be customized and designed to be compatible with specific automotive engine configurations. This ensures proper fitment and alignment with the engine’s components, reducing the risk of misalignment, slippage, or premature wear. Customization also allows for the adaptation of drive belt pulleys to different vehicle models and engine variations.

Overall, the use of drive belt pulleys in automotive engines provides advantages such as efficient power distribution, versatility, easy maintenance, improved efficiency and performance, cost-effectiveness, noise and vibration damping, compact design, and customization options. These advantages contribute to the reliable operation, optimal performance, and enhanced driving experience of vehicles equipped with drive belt pulley systems.

China high quality Dtii a Long Lifetime Heavy Duty Belt Conveyor Rubber Lagging Drive Drum Pulley   pulley alternatorChina high quality Dtii a Long Lifetime Heavy Duty Belt Conveyor Rubber Lagging Drive Drum Pulley   pulley alternator
editor by CX

2023-10-03

Drive Belt Pulley

As one of the drive belt pulley manufacturers, suppliers, and exporters of mechanical products, We offer drive belt pulley and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the drive belt pulley.

Recent Posts