China Standard Custom Industry Polyurethane Rubber Conveyor Teeth Timing Synchronous Pulley with Great quality

Solution Description

PU Flex Timing Belt/PU Actually Limitless Timing Belt
*Polyurethane belt loop energy,by a unique thermoset molding method.
*High-high quality polyurethane materials resistant to put on the belt and tear tesistant proper ties.
*One of the core wire to increase belt energy,tensile stregth,so that the belt has very good dimensional security.
*Polyurethane power ring with little tolerances,can promise the accuracy of thickness and length.
*All of the earlier mentioned characteristics make the ployurethane ring has a higher energy with the bodily and chemical balance.
Polyurethane belt has the subsequent qualities:
*Mechanical properties                                                                *Chemical qualities
 Positive suit,synchronous,running                                                   Resistant to ageing,drinking water remedy,UVUVA,anti-ozne
 Constant length,no publish-elongation                                              Working temperature:-30ºC-80ºC(brief time could 
 Low noise                                                                                      withstand 110ºC)
 Wear resistant                                                                               Resistant in opposition to basic oils,fats and petrol
 Low-maintenance                                                                          Resistant to some acids
 Highly versatile
 Belt speeds up to 80m/s

This spherical PU timing belt especially             
ideal for minimal load synchronous transmission,
such as:workplace automation program and house appliances.

Relevant Belt

1.Ring belt from the steady steel core and the thermoplastic polyurethane substance,is a real no interface ring belt.
two.Ring belt to make sure the features and procedure underneath substantial load,this electrical power transmission belt for substantial-pace and substantial load transfer.
three.Ring belt length may possibly be from 1.seven-hundred to 22.000 meters.
four.Ring belt can be personalized according to customer’s specs of distinct designs,this sort of as:AT20,AT10,T10,T5,AT5,HTD8M,STD8M…..
*Ring belt specific processing:
  1.Tooth surface and nylon fabric
  2.Can be rolled back again a special sample grinding and drilling
  3.can protect the back again of the belt thicking
About opening belt
*Opening belt concluded with a continuous duration,the center and the sides parallel to the wire core.Normal roll length is fifty or a hundred meters.
*Open up (PU) CZPT belt with a variety of distinct main selection,this kind of as kevlar main,hugely flexible core(HF)high-functionality(HP)and substantial toughness(HPF)
*Manufacturing tolerance of modest dependable transmission and has a dimensional stability.The production process or in the tooth and tooth include a layer of nylon to make certain that apps working in the particular characterstics of the same.Also thicker layer of polyurethane in the belt or the again of the red plastic to stop corrosion or substantial load.

Product Record
*Varieties of model to decide on
MXL

Spec. Teeth Spec. Enamel Spec. Tooth Spec. Enamel Spec. Enamel Spec. Teeth Spec. Teeth Spec. Tooth
26MXL 33 36MXL 45 37MXL forty six 38MXL 48 41MXL 51 46MXL fifty eight 53MXL 66 54MXL 67
55MXL 70 56MXL 71 57MXL 72 58MXL seventy three 59MXL 74 60MXL 75 61MXL seventy six 63MXL 79
64MXL eighty two 65MXL 83 71MXL 89 72MXL 90 73MXL 92 74MXL ninety three 75MXL 95 76MXL ninety six
77MXL 97 78MXL 98 80MXL one hundred 81MXL  102   82MXL 103 84MXL one zero five 85MXL 106 86MXL 107
87MXL 110 88MXL 112 89MXL 114 92MXL 115 93MXL 119 94MXL one hundred twenty 95MXL 121 96MXL 122
97MXL 123 98MXL 124 99MXL 125 100MXL 126 101MXL 127 102MXL 128 105MXL 132 107MXL 134
109MXL 136 112MXL a hundred and forty 114MXL 143 115MXL one hundred forty four 116MXL one hundred forty five 120MXL 150 122MXL 153 124MXL 155 
126MXL 157 128MXL a hundred and sixty 132MXL a hundred sixty five 140MXL a hundred seventy five 143MXL 179 144MXL 180 145MXL 181 148MXL 185
150MXL 187 151MXL 189 152MXL one hundred ninety 153MXL 191 154MXL 192 155MXL 193 156MXL 195 160MXL 200
168MXL 210 184MXL 230 200MXL 250 204MXL 255 205MXL 256 208MXL 260 348MXL 435 400DMXL 500

T10 

Spec. Enamel Spec. Tooth Spec. Enamel Spec. Tooth Spec. Teeth Spec. Enamel Spec. Teeth Spec. Tooth
T10*260 26 T10*three hundred thirty T10*330 33 T10*370 37 T10*390 39 T10*400 40 T10*410 forty one T10*440 44
T10*450 forty five T10*460 46 T10*480 48 T10*five hundred 50 T10*510 fifty one T10*530 53 T10*540 54 T10*550 55
T10*560 fifty six T10*600 60 T10*610 sixty one T10*620 62 T10*630 sixty three T10*650 sixty five T10*660 66 T10*680 sixty eight
T10*690 sixty nine T10*seven hundred 70 T10*720 seventy two T10*730 73 T10*750 75 T10*780 seventy eight T10*800 80 T10*810 81
T10*830 eighty three T10*840 84 T10*850 85 T10*860 86 T10*880 88 T10*890 89 T10*900 ninety T10*910 ninety one
T10*920 92 T10*950 ninety five T10*960 ninety six T10*970 97 T10*980 98 T10*one thousand 100 T10*1571 101 T10*1050 105
T10*1080 108 T10*1100 a hundred and ten T10*1110 111 T10*1140 114 T10*1150 one hundred fifteen T10*1200 a hundred and twenty T10*1210 121 T10*1240 124
T10*1250 125 T10*1260 126 T10*1280 128 T10*1300 130 T10*1320 132 T10*1350 135 T10*1360 136 T10*1390 139
T10*1400 a hundred and forty T10*1410 141 T10*1420 142 T10*1440 144 T10*1450 145 T10*1460 146 T10*1500 a hundred and fifty T10*1520 152
T10*1560 156 T10*1580 158 T10*1600 a hundred and sixty T10*1640 164 T10*1700 one hundred seventy T10*1750 a hundred seventy five T10*1760 176 T10*1780 178
T10*1800 a hundred and eighty T10*1850 185 T10*1860 186 T10*1880 188 T10*1960 196 T10*1980 198 T10*2000 200 T10*2571 202
T10*2100 210 T10*2120 212 T10*2160 216 T10*2170 217 T10*2200 220 T10*2250 225 T10*2500 250 T10*2800 280

H

Spec. Tooth Spec. Enamel Spec. Tooth Spec. Tooth Spec. Teeth Spec. Teeth Spec. Teeth Spec. Enamel Spec. Enamel
200H 40 225H 45 250H 50 260H 52 270H fifty four 280H 56 300H sixty 315H 63 330H 66
350H 70 390H seventy eight 420H eighty four 450H ninety 460H ninety two 470H 94 480H ninety six 510H 102 540H 108
560H 112 570H 114 600H a hundred and twenty 630H 126 700H a hundred and forty 750H 150 900H 180        

 T2.5

Spec. Enamel Spec. Enamel Spec. Teeth Spec. Tooth Spec. Enamel Spec. Enamel Spec. Teeth Spec. Teeth
T2.5*one hundred twenty 48 T2.5*one hundred forty five fifty eight T2.5*one hundred sixty 64 T2.5*a hundred and eighty 72 T2.5*182.5 seventy three T2.5*two hundred eighty T2.5*215 86 T2.5*240 ninety six
T2.5*245 98 T2.5*260 104 T2.5*285 114 T2.5*330 132 T2.5*380 152 T2.5*420 168 T2.5*five hundred two hundred T2.5*600 240
T2.5*650 260 T2.5*780 312 T2.5*950 380                    

AT5

Spec. Teeth Spec. Teeth Spec. Enamel Spec. Teeth Spec. Tooth
AT5*375 75 AT5*390 78 AT5*455 91 AT5*490 98 AT5*500 100

AT10

Spec. Enamel Spec. Teeth Spec. Enamel Spec. Enamel Spec. Enamel Spec. Enamel Spec. Tooth Spec. Teeth
AT10*five hundred fifty AT10*600 sixty AT10*660 sixty six AT10*seven-hundred 70 AT10*730 seventy three AT10*780 78 AT10*800 800 AT10*840 eighty four
AT10*920 92 AT10*960 96 AT10*980 98 AT10*1050 a hundred and five AT10*1080 108 AT10*1100 110 AT10*1150 115 AT10*1200 one hundred twenty
AT10*1210 121 AT10*1250 one hundred twenty five AT10*1280 128 AT10*1300 130 AT10*1350 135 AT1390 139 AT10*1400 one hundred forty AT10*1480 148
AT10*1600 160 AT10*1700 one hundred seventy AT10*1860 186 AT10*1900 a hundred ninety                

S3M

Spec. Teeth Spec. Tooth Spec. Tooth Spec. Tooth Spec. Enamel Spec. Tooth Spec. Enamel Spec. Teeth
S3M120 forty S3M144 forty eight S3M150 fifty S3M183 61 S3M192 sixty four S3M201 67 S3M210 70 S3M231 77
S3M237 79 S3M246 82 S3M315 one zero five S3M357 119 S3M418 140 S3M420 140 S3M432 one hundred forty four S3M453 151
S3M459 153 S3M486 162 S3M492 164 S3M504 168 S3M510 170 S3M513 171 S3M519 173 S3M525 one hundred seventy five
S3M528 176 S3M537 179 S3M543 181 S3M546 182 S3M549 183 S3M555 185 S3M564 188 S3M571 191
S3M573 191 S3M585 195 S3M588 196 S3M600 two hundred S3M612 204 S3M705 235 S3M738 246 S3M780 260
A3M717 239 D3M327 109                        

HTD3M

Spec. Tooth Spec. Tooth Spec. Enamel Spec. Tooth Spec. Enamel Spec. Tooth Spec. Enamel Spec. Tooth
3M135 forty five 3M144 48 3M171 fifty seven 3M174 58 3M177 fifty nine 3M189 sixty three 3M195 65 3M207 sixty nine
3M225 75 3M228 76 3M243 81 3M255 eighty five 3M264 88 3M276 92 3M288 96 3M294 98
3M300 a hundred 3M312 104 3M315 105 3M324 108 3M336 112 3M345 a hundred and fifteen 3M357 119 3M360 one hundred twenty
3M366 122 3M375 one hundred twenty five 3M384 128 3M402 134 3M420 one hundred forty 3M423 141 3M435 145 3M456 152
3M459 153 3M462 154 3M468 156 3M471 157 3M483 161 3M486 162 3M495 one hundred sixty five 3M504 168
3M510 170 3M522 174 3M525 175 3M537 179 3M540 one hundred eighty 3M549 183 3M555 185 3M564 188
3M573 191 3M606 202 3M657 219 3M669 223 3M693 231 3M699 233 3M708 236 3M720 240
3M738 246 3M879 293 3M1569 523 3M2040 680                

*We also have design :L/XL/XXL/T5/AT3/H/PK/PJ/PH/DMB/DT5/DR/PL/MB/DAT10/DT10/S2M/S5M/5M/HTD2M/HTD5M/HTD14M/HTD8M,or as your requirment to make new design but need to shell out design expense,If you have no amount,noted you should!

Application 

About firm
ZheJiang CZPT Transmission Equipment Co.,Ltd. 
Was recognized in March 2004,have 16 many years of generation knowledge.Nearby in No. 11, Lane 243, Jiugan Highway, Sijing City, Xihu (West Lake) Dis. District, ZheJiang ,China.Main offer in transmission belt and modular chain belt and many others.production quantity more than 50000 pieces 1 calendar year.all sorts of rubber substance,pvc and pu material etc.acknowledge specical creating as your requirment. We support personalized services.and delivery time most speediest 1day according  to your orders.Businesses adhering to the “integrity,top quality,cost,and support very first,constant innovation” company philosophy,devoted to offer high high quality goods and substantial-quality services for the consumer,the firm continutes to grow the scale of advancement,consumers during the country.

If you have fascinated,free time to get in touch with me make sure you.

 
 

    
 

In a twin pulley technique, this ratio is equivalent to the reference diameter of the output pulley currently being greater than the reference diameter of the enter pulley. It’s relatively easy as long as you estimate the equipment ratios for a a lot more complicated pulley technique phase by step. For multiple pulleys, the ratios of the various elements of the system need to be calculated to establish the general ratio. In the picture previously mentioned, the reference diameter of the reduced drive wheel is 20mm, the radius of the higher wheel is 40mm, and the ratio is 2:1. 2 spins on the decrease wheel and 1 spin on the higher wheel. The gear ratio also tells us something about the torque of the system due to the fact the ratio of output torque to input torque is equal to the equipment ratio. Therefore, the torque applied to the higher wheel is 2 times as fast, but the pace is halved.
In a compound pulley program, there is the two a movable pulley and a fixed pulley. This signifies that not only does the load “come to feel” lighter, but you can also alter the route of the pressure. Although this sort of configuration can go large loads really simply, it will come at the cost of demanding very a bit of movement to do the work.

China Standard Custom Industry Polyurethane Rubber Conveyor Teeth Timing Synchronous Pulley     with Great quality

Drive Belt Pulley

As one of the drive belt pulley manufacturers, suppliers, and exporters of mechanical products, We offer drive belt pulley and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the drive belt pulley.

Recent Posts