China factory Mobile Belt Conveyor Drive Pulley Conveyor Belt pulley puller

Product Description

Mobile Belt Conveyor Drive Pulley Conveyor Belt

 

Product Introduction
 

The belt conveyor has the advantages of large conveying capacity, simple structure, convenient maintenance and standardization of components. It can be transported in a single unit according to the requirements of the transportation process. Multiple belt conveyors consist of or are combined with other conveyors to form horizontal or inclined conveyor systems to meet the needs of different layouts.

Our Advantages
 

1. Belt conveyor is advanced and simple in structure and easy to maintain.

2. Its transfer capacity is high, transfer distance is long.

3. Widely used in mining, metallurgical and coal industry to transfer sandy or lump material, or packaged material.

4. In many situation, it is a very important component of nonstandard machinery.

5.We have various types of hopper belt conveyor, such as 400, 500, 650, 800, 1000, 1200 etc.
 

 

Product Parameters

Touch roll

form

Belt speed

(m/s)

Belt width(mm)

500

650

800

1000

1200

1400

Capacity(t/h)

Groove

touch roll

0.8

78

104

/

/

/

/

1.0

97

131

278

435

655

891

1.25

122

206

318

544

819

1115

1.6

156

264

445

696

1048

1427

2.0

191

323

646

853

1284

1748

2.5

232

391

551

1033

1556

2118

3.15

/

/

824

1233

1858

2528

4.0

/

/

/

/

2202

2995

Parallel

touch roll

0.8

41

67

118

/

/

/

1.0

52

88

147

230

345

469

1.25

66

110

184

288

432

588

1.6

84

142

236

368

558

753

2.0

103

174

289

451

677

922

2.5

125

211

350

546

821

1117

  

Working Principle

A material transfer process is formed between the initial feed point and the final discharge point on a certain conveying line. It can not only carry out the transportation of scattered materials, but also carry out the transportation of finished goods. In addition to pure material transportation, it can also cooperate with the requirements of the technological process in the production process of various industrial enterprises to form a rhythmical flow operation transportation line.

Company Information

XKJ Machinery has won many honors through outstanding products and advanced technology and we always see product quality as life and customers as God. Customers mean everything and we will always carry out the quality principle of being responsible for every procedure, every product and every customer and serve every customer with heart and soul. Everything we do, we do it for your benefit and we deeply believe that our CHINAMFG will be finally paid back.

 

Why choose us ?

1.We are real manufacture factory ( not dealer)

All machineries from ZheJiang HangZhou Mining Machinery Manufactory are made by ourselves, with lower price, good quality and assured full after service. So please buy machine from factory.

2. Our equipment with senior engineers for research and development.

3. We’d like to recommend a suitable type for you and send you a best quotation. If you are new for this business, we will help you.

Service

Before-sale services:
We guide customers to choose the best and applicable device; provide the advanced, energy-saving and practical technological processes, as well as we are responsible for the plHangZhou and design of the site.

Sale services:

Products must be inspected strictly before being sold; customers are invited to simulate and test machine on-the-spot and raise objections; in accordance with the agreements stipulated in the contract, we will arrange delivery.

After-sale services:
Our Company will send professional engineers to guide device installation, debug and train operators until customers are fully satisfied. Moreover, we will design and produce machines according to the special requirements of customers.

Solemn Promise:

The quality guarantee period of machines is 1 year except the wearing parts.

 

Packing

Normally the machines are taken apart before delivery and are packed by suitable packing ways, the packing ways are as below: nude packing, bundle packing, grass rope packing, water proof packing, wooden pallets packing, wooden box or carton box packing.

FAQ

Q: How about the quality of your products?

A: Our machines are manufactured strictly according to national and international standards, and we take a test on each equipment before delivery. You can also use Trade Assurance by Alibaba for product quality protection, on-time shipment protection and payment protection.

Q: How about the price?

A: As a manufactory, we can give you lower price than trade companies. Besides, customers from Alibaba can get a discount.

Q: Do you provide after-sale service?

A: Yes. The warranty period of our machines is 1 year, and we have a professional after-sale service team to promptly and thoroughly solve your problems.

 

Q: Do you provide equipment operation training?

A: Yes. We can send professional engineers to the working site for equipment installation, adjustment, and operation training.

Q: Can you test our samples?

A: Yes. You can send your samples to us for test and analysis.

Q: Can we visit your factory?

A: Yes. You can visit our factory anytime you want.

 

Type: Belt Conveyor
Motor Type: AC Motor
Motor Power: 12-45kw
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

drive pulley

Can drive pulleys withstand extreme environmental conditions?

Drive pulleys are mechanical components used in various systems to transmit power and motion. They are commonly found in industries such as manufacturing, mining, and agriculture. The ability of drive pulleys to withstand extreme environmental conditions depends on several factors, including the materials used, the design and construction of the pulley, and the specific conditions it is exposed to.

In general, drive pulleys are designed to be durable and capable of operating under a wide range of environmental conditions. They are typically made from materials such as steel, cast iron, or aluminum, which offer good strength and resistance to wear and corrosion. These materials can withstand moderate to high temperatures, as well as exposure to moisture, dust, and other contaminants.

However, there are limits to the environmental conditions that drive pulleys can withstand. Extreme temperatures, such as those found in extremely hot or cold environments, can affect the performance and lifespan of the pulleys. High temperatures can cause thermal expansion, which may lead to misalignment or excessive wear. Cold temperatures can make materials more brittle and prone to cracking or breaking under stress.

In addition to temperature, other environmental factors such as humidity, corrosive substances, and abrasive particles can also impact the performance of drive pulleys. High humidity levels can promote corrosion, especially if the pulleys are not properly protected or coated with suitable protective finishes. Corrosion can weaken the pulley’s structural integrity and lead to premature failure.

Abrasive particles, such as dust or grit, can cause wear and tear on the pulley’s surface and the belt that runs on it. This can result in reduced traction and slipping, affecting the efficiency and reliability of the system. Proper maintenance and regular cleaning can help mitigate the effects of abrasive particles.

It’s worth noting that some applications may require special types of drive pulleys specifically designed to withstand extreme environmental conditions. For example, in industries where pulleys are exposed to chemicals or highly corrosive substances, pulleys made from stainless steel or other corrosion-resistant materials may be used.

In conclusion, while drive pulleys are designed to be robust and capable of withstanding a wide range of environmental conditions, there are limits to what they can endure. Extreme temperatures, humidity, corrosive substances, and abrasive particles can all impact the performance and lifespan of drive pulleys. It’s important to consider the specific environmental conditions and select pulleys that are suitable for the intended application.

drive pulley

What maintenance procedures are necessary to ensure the reliability of drive pulleys?

Proper maintenance procedures are essential to ensure the reliability and longevity of drive pulleys. Regular maintenance helps identify and address potential issues before they escalate, minimizing downtime and preventing costly breakdowns. Here are some important maintenance procedures for drive pulleys:

1. Visual Inspection:

Perform regular visual inspections of the drive pulleys to check for any signs of wear, damage, or misalignment. Look for cracks, chips, or excessive wear on the pulley surface. Inspect the pulley hub and keyway for any signs of damage or corrosion. Ensure that the pulley is properly aligned with the drive shaft and other components. If any abnormalities are detected, further investigation or corrective action may be necessary.

2. Lubrication:

Follow the manufacturer’s guidelines for lubrication to ensure smooth operation of the drive pulley. Lubrication reduces friction and heat, preventing premature wear and extending the pulley’s lifespan. Apply the recommended lubricant to the pulley bearings or bushings as per the specified intervals. Ensure that the lubricant used is compatible with the pulley material and operating conditions.

3. Tension and Belt/Chain Alignment:

Check the tension of the belts or chains connected to the drive pulley regularly. Incorrect belt or chain tension can lead to slippage, reduced power transmission efficiency, and accelerated wear on the pulley and associated components. Follow the manufacturer’s guidelines or consult the equipment manual for the appropriate tensioning procedures. Additionally, ensure proper alignment between the pulley and the driven components to prevent excessive side loading or belt/chain misalignment.

4. Cleaning:

Keep the drive pulleys clean and free from debris, dust, or contaminants. Regularly remove any accumulated dirt, debris, or residue from the pulley surfaces and grooves. Use appropriate cleaning methods and tools, such as brushes or compressed air, to ensure thorough cleaning without causing damage to the pulley or its components. Clean pulleys help maintain proper belt traction and reduce the risk of slippage.

5. Belt/Chain Maintenance:

In addition to maintaining the drive pulleys, proper maintenance of the belts or chains connected to the pulleys is crucial. Inspect the belts or chains for signs of wear, damage, or stretching. Replace worn-out or damaged belts or chains promptly to prevent adverse effects on the drive pulley’s performance. Follow the manufacturer’s guidelines for belt or chain tensioning, alignment, and replacement intervals.

6. Balancing:

Imbalance in the drive pulley can result in vibration, increased stress on the pulley and associated components, and reduced overall system performance. Periodically check the balance of the drive pulley and take corrective measures if necessary. Balancing may involve the use of specialized equipment or consulting a professional service provider to ensure proper balancing and smooth operation.

7. Record-Keeping:

Maintain accurate records of maintenance activities performed on the drive pulleys. This includes recording inspection dates, lubrication schedules, belt or chain replacements, and any corrective actions taken. Proper record-keeping helps track maintenance history, identify recurring issues, and ensure compliance with maintenance schedules and recommendations.

8. Professional Inspection:

Consider engaging a qualified professional or a service provider for periodic inspections and maintenance of drive pulleys, especially in complex or critical applications. Professionals can perform more detailed assessments, identify potential issues, and provide expert recommendations to ensure the reliability and optimal performance of the drive pulleys.

In conclusion, regular maintenance procedures are necessary to ensure the reliability of drive pulleys. Visual inspections, proper lubrication, tension and alignment checks, cleaning, belt/chain maintenance, balancing, record-keeping, and professional inspections all contribute to the longevity and optimal operation of drive pulleys, reducing the risk of failures and improving overall system reliability.

drive pulley

In which industries and applications are drive pulleys commonly used?

Drive pulleys are widely used in various industries and applications where power transmission and motion control are essential. Their versatility and effectiveness make them a fundamental component in numerous mechanical systems. Here are some of the industries and applications where drive pulleys are commonly employed:

1. Manufacturing and Industrial Machinery:

Drive pulleys play a crucial role in manufacturing and industrial machinery. They are used in conveyor systems to transport materials or products along production lines. Drive pulleys enable the movement of items such as bulk goods, packages, and components in industries including automotive, food processing, mining, and logistics. Additionally, drive pulleys are found in various types of machinery, such as pumps, compressors, and generators, where they facilitate power transmission and rotational motion.

2. Agricultural Equipment:

In the agricultural sector, drive pulleys are employed in a range of equipment. They are used in farming machinery, including tractors, combines, and harvesters, to transmit power and control the operation of components such as belts, chains, and augers. Drive pulleys are vital in applications such as grain handling, irrigation systems, and equipment used for planting, harvesting, and processing crops.

3. Construction and Mining:

Drive pulleys are extensively utilized in the construction and mining industries. They are employed in heavy machinery, including cranes, excavators, loaders, and conveyor systems, to facilitate the movement of materials, such as soil, rocks, and ores. Drive pulleys are essential for the operation of equipment involved in earthmoving, material handling, and mineral extraction processes.

4. Material Handling and Warehousing:

In material handling and warehousing applications, drive pulleys are indispensable. They are used in conveyor systems to transport goods, packages, and materials within warehouses, distribution centers, airports, and shipping facilities. Drive pulleys enable the efficient movement of products along assembly lines, sorting systems, and storage areas, ensuring smooth and continuous workflow.

5. Automotive and Transportation:

Drive pulleys find widespread use in the automotive and transportation industries. They are employed in vehicles, including cars, trucks, buses, and trains, to transmit power from engines to various components such as water pumps, alternators, and air conditioning compressors. Drive pulleys also play a role in belt-driven systems, such as power steering and supercharging systems, enhancing vehicle performance.

6. Renewable Energy:

In the field of renewable energy, drive pulleys are utilized in wind turbines and solar tracking systems. Drive pulleys help convert wind or solar energy into rotational motion, driving generators or tracking mechanisms to maximize energy capture. They are critical components that enable efficient power generation in wind farms and solar power plants.

7. Exercise and Fitness Equipment:

Drive pulleys are commonly found in exercise and fitness equipment, such as treadmills, stationary bikes, and weight machines. They facilitate the transfer of power and motion from motors or users to various components, such as belts, flywheels, and resistance systems. Drive pulleys ensure smooth and controlled movement, allowing users to engage in effective workouts.

8. Marine and Shipbuilding:

In the marine industry and shipbuilding sector, drive pulleys are utilized in propulsion systems, winches, cranes, and cargo handling equipment. They play a vital role in transmitting power and controlling the movement of various components, enabling the operation of vessels, offshore platforms, and port facilities.

These are just a few examples of the industries and applications where drive pulleys are commonly used. Their versatility and importance in power transmission and motion control make them indispensable components in a wide range of mechanical systems across different sectors.

China factory Mobile Belt Conveyor Drive Pulley Conveyor Belt   pulley puller		China factory Mobile Belt Conveyor Drive Pulley Conveyor Belt   pulley puller
editor by CX

2023-10-10

Drive Belt Pulley

As one of the drive belt pulley manufacturers, suppliers, and exporters of mechanical products, We offer drive belt pulley and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of the drive belt pulley.

Recent Posts